Hot Tub Servicing Options 
Water changes - Season start up - Wintertising  
Full Hot Tub Service
Full Annual Service for Hot Tubs that are kept running all year 
1. On arrival add bio film remover to water and fully run Hot Tub to test 
(faults found will be reported). 
2. Remove panels where possible and check for leaks 
3. Remove Filters and clean (Replacements are extra). 
4. Cut power to Hot Tub & Drain old water. 
5. Loosen all pipe union connections to remove undrained water. 
6. Check & Remove scale from Heater 
7. Clean Hot Tub shell 
8. Remove jets & pillows where applicable & clean  
(Replacements chargeable). 
9. Rinse Hot Tub shell 
10. Replace any worn 'o' rings & Gaskets & reconnect Plumbing 
11. Refill Hot Tub & reboot power. 
12. Bleed pumps and re-test Hot Tub 
13. Check for Ozone 
14. Refit Jets & Filters 
15. Clean Hot Tub Cover 
16. Shock Dose water & balance pH 
17. Replace Aromatherapy  
(where applicable). 
18. Refit panels and clean cabinet 
19. Test all Components 
20. Show customer and discuss any faults found. 
21. Leave your garden how we found it. 
22. Collect payment & thank customer for using our services. 
23. Arrange next visit as per your instructions 
Only £250* 
Payable in advance to secure the appointment  
Season Start Up  
Reopening your Hot Tub for the new season (if winterised) 
1. Clean Acrylic Surface & remove any surplus/rain water 
2. Clean/Replace Filters. (Replacements charged extra) 
3. Fill system and add shock dose treatment. 
4. Bleed Pumps 
5. Check operation of Components. (including Ozone) is yours working? 
6. Balance pH. 
7. Check for leaks 
8. Clean Cover 
9. Informed customer of any problems found. 
10. Minor problems will be solved as part of service. 
11. Leave Garden as Found 
£150* payable in advance  
*The above prices are for SO & PO postcodes only, fill in the below form for a price for your area  
Hot Tub Refresh 
Regular Water Changes 
(Suggested 2-4 per year for Tubs used all year round) * 
1. Add System Flush & Test 
2. Test All Components 
3. Check for leaks & Tighten all Plumbing Unions 
4. Check Jets for full air and water flow 
5. Full Drain down & clean of Hot Tub 
6. Remove, Soak & Clean Filters (Replacements are chargeable). 
7. Remove Pillows & clean 
8. Clean Cover 
9. Check Heater for scale & Remove as required 
10. Refill Hot Tub to correct level 
11. Add Shock Dose & Balance PH 
12. Bleed pumps 
13. Test All Components 
14. Refill aromatherapy pod. 
(Where applicable). 
15. Leave Garden as Found.  
Please note, if you have a Swim-spa, these prices do not apply, fill in the quote form below stating that you have a swim-spa and where you live. 
Shut Down for the Winter 
1. Add bio-film remover to the Hot Tub and run at full cycle. 
2. Test All Components.  
(All faults reported at this stage). 
3. Fully drain Hot Tub and clean shell surface. 
4. Remove Jet nozzles and clean. 
5. Remove Filters, clean & leave to soak in cleaning solution. 
6. Remove all unseen water from pumps and other equipment. 
7. Remove scale from Heater tube. (where applicable) 
8. Clean & secure Thermal Cover 
9. Inform Customer of any Faults. 
10. Minor problems will be solved. 
11. Leave Garden as found 
Payable in advance  
Designed and created by it'seeze
Our site uses cookies. For more information, see our cookie policy. ACCEPT COOKIES MANAGE SETTINGS